1 / 6
Overview
The SONOFF TH Origin 16A is a Wi-Fi switch that controls high-power appliances while monitoring temperature and humidity on its own LCD screen. Set thresholds in the eWeLink app and you will get a push notification when a reading goes over the limit or the device changes state.
It can turn an ordinary thermostat into a smart device, or automate an irrigation system, and works well for electric floor heating or geysers. The temperature sensor is not included, so choose the probe that suits your application.
- At a glance
- Brand
- SONOFF
- Model
- THORIG16
- Load
- up to 16A
- Chip
- ESP32
- Display
- LCD
What it does
16A switching
handles high-power appliances such as electric floor heating and geysers.
Live readings
the LCD screen shows temperature and humidity at a glance.
Threshold alerts
push notifications when a reading crosses your limit or the on/off status changes.
Smart automation
automate heating, irrigation and other systems based on the readings.
Sensor extension
RL560 cables extend THS01 and DS18B20 sensors up to 60m, and the MS01 soil sensor up to 10m.
Home Assistant
add to Home Assistant through the eWeLink add-on.
Specifications
From the manufacturer's data. Check the label on the device if your installation depends on a rating.
| Load | up to 16A |
|---|---|
| Chip | ESP32 |
| Display | LCD |
| Compatible sensors | THS01, WTS01 and MS01 (sensor not included) |
| Sensor extension cable | RL560, 5m standard, up to 60m |
| Wi-Fi | 2.4GHz |
Before you install
- A neutral wire is required.
- You need 2.4GHz Wi-Fi and an internet connection for setup and control.
- Anything wired into mains power should be fitted by a qualified electrician.
