1 / 9
Overview
The SONOFF MINI-ZBDIM is a small dimmer module that fits behind an existing light switch. It turns a dimmable lighting circuit into one you can control from an app, by voice or through automations, without replacing the fittings.
It suits living rooms, bedrooms and garden lights, where softer lighting feels better and uses less power. Your existing wall switch still works as normal, so everyone in the house can keep using it. Its 220 to 240V input suits Kenya's 240V mains.
- At a glance
- Brand
- SONOFF
- Model
- MINI-ZBDIM
- Protocol
- Zigbee 3.0 (IEEE 802.15.4, 2.4GHz)
- Input voltage
- 220 to 240V AC, 50Hz
- Maximum load
- 200VA (LED), 200W (resistive and incandescent)
What it does
Smooth 1 to 100 percent dimming with soft start and stop, suited to dimmable LEDs, incandescent and halogen bulbs
Zigbee 3.0 router that helps extend your smart home network
Per-circuit power monitoring, with readings shown through eWeLink or Home Assistant
Works with external on/off or dimming switches for one-way and two-way setups
Overheat and overload protection for reliable operation in enclosed ceiling spaces
Slim enough for tight wall boxes
Specifications
From the manufacturer's data. Check the label on the device if your installation depends on a rating.
| Protocol | Zigbee 3.0 (IEEE 802.15.4, 2.4GHz) |
|---|---|
| Input voltage | 220 to 240V AC, 50Hz |
| Maximum load | 200VA (LED), 200W (resistive and incandescent) |
| Maximum current | 2A |
| Dimming type | Trailing edge |
| Working temperature | 10°C to 40°C |
| Dimensions | 45 x 39.4 x 16.8 mm |
Before you install
- Remote and voice control needs a Zigbee hub, such as SONOFF Zigbee Bridge or Home Assistant with Zigbee2MQTT.
- Fits standard wall boxes 60, 86 or 120 mm deep.
- Anything wired into mains power should be fitted by a qualified electrician.
